ERAYAK 3000W Pure Sine Wave Inverter with Hardwire Port for RV, Truck & Off-Grid Power

Sale price$259.00 USD Regular price$359.00 USD
Save $100.00
Description
ERAYAK DSU-3000

3000W Pure Sine Wave Power 12V DC to 110–120V AC

Convert 12V battery power into stable 110–120V, 60Hz AC output with 3000W continuous power, 6000W peak power and over 90% conversion efficiency.

12VDC battery input
3000WContinuous output
6000WPeak power
60HzAC frequency
6mRemote cable
Clean Power Technology

Pure Sine Wave Output

Pure sine wave AC is designed to provide stable power for a broad range of electrical and sensitive electronic devices when used within the inverter’s rated limits.

2× AC 110–120V AC outlets for connected equipment within the inverter’s rated output.
USB-A One 5V, 2.1A USB-A port for compatible USB-powered devices.
18W USB-C One USB-C port rated at 18W for compatible devices.
3000W Terminal High-output terminal connection listed for the 3000W system.
Control & Monitoring

Power Information at a Glance

Monitor key operating information on the inverter and control power from a more convenient location using the included remote panel and cable.

LCD Monitor

See Key System Data

View input voltage, output voltage, output power and error messages directly on the LCD screen.

Remote Control

On/Off Control up to 6m Away

The included remote control panel and 6-meter cable let you switch the inverter on or off from a convenient position.

Error Display

Faster Fault Awareness

Displayed error messages help make system monitoring and troubleshooting more direct.

Multi-Protection

Layered Protection for the Power System

Built-in electrical safeguards, isolation design, soft-start technology and temperature-managed cooling support dependable operation.

Built-In Fusing 10×35A

Ten built-in 35A fuses form part of the inverter’s internal protection system.

Overload ProtectionResponds when connected demand exceeds supported output.
Overheat ProtectionHelps protect the inverter under excessive temperature conditions.
Short-Circuit ProtectionBuilt-in response for output short-circuit conditions.
Under-Voltage ProtectionMonitors low input-voltage conditions.
Input/Output IsolationIsolation design separates input and output sides.
Soft-Start TechnologySupports a controlled inverter startup sequence.
2 Temperature-Controlled FansCooling fans respond to internal temperature demand.
Efficiency & Reliability

More Useful Power from Your Battery

High conversion efficiency and low no-load consumption help reduce unnecessary battery draw while the inverter is operating.

>90%

Conversion Efficiency

Designed to convert more of the battery’s DC energy into usable AC output.

9W

No-Load Power Draw

Only 9W stated no-load consumption helps conserve battery energy when no device is drawing output power.

2

Temperature-Controlled Fans

Dual cooling fans activate according to temperature demand to manage internal heat.

Package & Documentation

Ready for a Planned Installation

The package includes the inverter, battery cables, remote control hardware and English documentation listed below.

What’s in the Box

  • 1× ERAYAK DSU-3000 pure sine wave inverter
  • 4× car battery cables
  • 1× remote control panel
  • 1× 6m remote control cable
  • 1× English manual

Testing References

  • EMC / FCC testing referenced in the product brief
  • LVD testing referenced in the product brief
  • ETL testing referenced in the product brief
  • GS testing referenced in the product brief
  • Environmental testing referenced as “WEE” in the product brief
Confirm the exact certificate names, issuing bodies, report numbers, applicable markets and whether “WEE” should read “WEEE” before publishing certification logos or definitive certification claims.

Installation & Battery Safety

High-current 12V inverter systems require correct cable sizing, overcurrent protection, polarity, ventilation and secure connections.

  • Read the supplied manual before installation or operation.
  • Use only a 12V DC battery system and confirm correct polarity before connecting.
  • Keep ventilation openings clear and install in a dry, well-ventilated location.
  • Do not exceed the inverter’s continuous output rating; check appliance startup demand before connection.
  • Use appropriately rated cables and protection devices; consult a qualified installer when required.
Buyer Questions

DSU-3000 FAQ

Key details to check before choosing and installing the inverter.

What battery voltage does the DSU-3000 require?

It is designed for a 12V DC battery system. Do not connect it to a battery system with a different nominal voltage.

What is the difference between 3000W and 6000W?

3000W is the stated continuous output rating. 6000W is the stated peak rating for short-duration demand. Connected equipment must remain within the inverter’s supported ratings, including startup demand.

What information appears on the LCD?

The display shows input voltage, output voltage, output power and error messages for system monitoring.

How far away can I control the inverter?

The included remote panel uses the supplied 6-meter cable and allows the inverter to be switched on or off from that connected location.

What output connections are provided?

The supplied specification lists two 110–120V AC outlets, one 5V 2.1A USB-A port, one 18W USB-C port and a 3000W terminal connection.

Can it power any 120V appliance?

Compatibility depends on the appliance’s running wattage, startup surge and operating requirements. Check the equipment label and manual before connection, and do not exceed the inverter’s ratings.

ERAYAK Support Beyond the Box

Includes a stated 36-month warranty and access to 24-hour professional service.

36 Month Warranty
Description
ERAYAK DSU-3000

3000W Pure Sine Wave Power 12V DC to 110–120V AC

Convert 12V battery power into stable 110–120V, 60Hz AC output with 3000W continuous power, 6000W peak power and over 90% conversion efficiency.

12VDC battery input
3000WContinuous output
6000WPeak power
60HzAC frequency
6mRemote cable
Clean Power Technology

Pure Sine Wave Output

Pure sine wave AC is designed to provide stable power for a broad range of electrical and sensitive electronic devices when used within the inverter’s rated limits.

2× AC 110–120V AC outlets for connected equipment within the inverter’s rated output.
USB-A One 5V, 2.1A USB-A port for compatible USB-powered devices.
18W USB-C One USB-C port rated at 18W for compatible devices.
3000W Terminal High-output terminal connection listed for the 3000W system.
Control & Monitoring

Power Information at a Glance

Monitor key operating information on the inverter and control power from a more convenient location using the included remote panel and cable.

LCD Monitor

See Key System Data

View input voltage, output voltage, output power and error messages directly on the LCD screen.

Remote Control

On/Off Control up to 6m Away

The included remote control panel and 6-meter cable let you switch the inverter on or off from a convenient position.

Error Display

Faster Fault Awareness

Displayed error messages help make system monitoring and troubleshooting more direct.

Multi-Protection

Layered Protection for the Power System

Built-in electrical safeguards, isolation design, soft-start technology and temperature-managed cooling support dependable operation.

Built-In Fusing 10×35A

Ten built-in 35A fuses form part of the inverter’s internal protection system.

Overload ProtectionResponds when connected demand exceeds supported output.
Overheat ProtectionHelps protect the inverter under excessive temperature conditions.
Short-Circuit ProtectionBuilt-in response for output short-circuit conditions.
Under-Voltage ProtectionMonitors low input-voltage conditions.
Input/Output IsolationIsolation design separates input and output sides.
Soft-Start TechnologySupports a controlled inverter startup sequence.
2 Temperature-Controlled FansCooling fans respond to internal temperature demand.
Efficiency & Reliability

More Useful Power from Your Battery

High conversion efficiency and low no-load consumption help reduce unnecessary battery draw while the inverter is operating.

>90%

Conversion Efficiency

Designed to convert more of the battery’s DC energy into usable AC output.

9W

No-Load Power Draw

Only 9W stated no-load consumption helps conserve battery energy when no device is drawing output power.

2

Temperature-Controlled Fans

Dual cooling fans activate according to temperature demand to manage internal heat.

Package & Documentation

Ready for a Planned Installation

The package includes the inverter, battery cables, remote control hardware and English documentation listed below.

What’s in the Box

  • 1× ERAYAK DSU-3000 pure sine wave inverter
  • 4× car battery cables
  • 1× remote control panel
  • 1× 6m remote control cable
  • 1× English manual

Testing References

  • EMC / FCC testing referenced in the product brief
  • LVD testing referenced in the product brief
  • ETL testing referenced in the product brief
  • GS testing referenced in the product brief
  • Environmental testing referenced as “WEE” in the product brief
Confirm the exact certificate names, issuing bodies, report numbers, applicable markets and whether “WEE” should read “WEEE” before publishing certification logos or definitive certification claims.

Installation & Battery Safety

High-current 12V inverter systems require correct cable sizing, overcurrent protection, polarity, ventilation and secure connections.

  • Read the supplied manual before installation or operation.
  • Use only a 12V DC battery system and confirm correct polarity before connecting.
  • Keep ventilation openings clear and install in a dry, well-ventilated location.
  • Do not exceed the inverter’s continuous output rating; check appliance startup demand before connection.
  • Use appropriately rated cables and protection devices; consult a qualified installer when required.
Buyer Questions

DSU-3000 FAQ

Key details to check before choosing and installing the inverter.

What battery voltage does the DSU-3000 require?

It is designed for a 12V DC battery system. Do not connect it to a battery system with a different nominal voltage.

What is the difference between 3000W and 6000W?

3000W is the stated continuous output rating. 6000W is the stated peak rating for short-duration demand. Connected equipment must remain within the inverter’s supported ratings, including startup demand.

What information appears on the LCD?

The display shows input voltage, output voltage, output power and error messages for system monitoring.

How far away can I control the inverter?

The included remote panel uses the supplied 6-meter cable and allows the inverter to be switched on or off from that connected location.

What output connections are provided?

The supplied specification lists two 110–120V AC outlets, one 5V 2.1A USB-A port, one 18W USB-C port and a 3000W terminal connection.

Can it power any 120V appliance?

Compatibility depends on the appliance’s running wattage, startup surge and operating requirements. Check the equipment label and manual before connection, and do not exceed the inverter’s ratings.

ERAYAK Support Beyond the Box

Includes a stated 36-month warranty and access to 24-hour professional service.

36 Month Warranty

Customers praised this pure sine wave inverter for powering appliances like microwaves, fridges, and AC units reliably. "This powerhouse is keeping a fridge, 57" TV, microwave, Keurig...running around the clock." Many noted excellent customer service. Some mentioned voltmeter calibration issues and small included cables. Shoppers valued the quiet operation and remote control.

  • Keeping a fridge, 57" TV, microwave, Keurig...running around the clock without a hitch.
  • Pure sine wave inverter. Creates high quality power with stable frequency.
  • It's quiet, reliable, and easy to use.
Remote (positive)Inverter (positive)Power (positive)Display (positive)Customer service (positive)
  • 5 stars: 17 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Avian Washington
Erayak Stands By Both Its Products and Its Customers

I bought two 3000w inverters with my own money. Admittedly, I destroyed them both due to storing them inside an enclosed space - perhaps even some other factors I created as well. The inverter(s) worked well and came highly recommended by YouTube sensations John "The Headsamsher" Daniels and his daughter, Keira. Their wild video put this product through rigorous paces and it passed all tests of what was thrown at it. their video was convincing enough; proof enough, to buy the Erayak inverter - twice. After blowing the internal capacitors (28 total between two inverters), I decided to reach out to the company for advice on where to find the correct capacitors for a replacement. Erayak's customer service team were sympathetic to my plight - so much so, they recommended that i toss the purchased two units and at their own business expense, send me a new one the next day. They even paid for the shipping and handling costs. I paid NOTHING! I am here now to pay my well-warranted gratitude. Erayak showed more concern for me and my safety above their bottom line. I now have the new unit and am having it installed inside a better, well-ventilated location in my RV. Thank you Erayak, for you never even publicized that, why, or how, you helped me. You just quietly did a good deed. John "The Headsmasher" Daniels, if you're reading this five-star review, you were right about this company. they do care. they do listen when their customer speaks! Buy quality products made by Erayak. You'll be glad you did.

A
Avian Washington
Erayak: A Company with Quality Products and Professional Principles

I am proud to say that I purchased the DSU-3000 Pure Sine Wave inverter based on the highest recommendation by John "The Headsmasher" Daniels and daughter, Keira. That YouTube electronics sensation duo really put this model through its paces, and the equipment never failed to amaze them, or fail in any respect for that matter. John also said that Erayak is a company that listens to their customers when a good suggestion is made. I personally now know how true John words are. I foolishly destroyed not one, but two of these inverters, by not knowing how to best wire them. I blew up two sets of internal capacitors - perhaps due to having the inverter inside a space that was not ventilated well enough. In any case, I wrote to the company, explained my failure and honestly owned up to my misuse of their product. they not only commended me for telling the truth, patiently giving me electronics advice, then offering to send me a replacement unit at their expense - including shipping! Who does that in this economy?! Not only are the products top-notch, but so is their customer support team. My negligence destroyed two masterpieces! Yet, above their merchandise and reputation, Erayak showed concern for my dream and most importantly, my life! Then they went and sent me a replacement to show support. Thank you, Erayak! I will be forever grateful to you.

A
Amazon Customer
Erayak 2000W Pure Sine Wave Inverter 12V DC to 120V AC Converter

This is a well made inverter. It is a high frequency inverter that uses only one large High frequency Toroidal transformer for stepping up the 12V dc to 170V dc for feeding the DC to AC inverter output stage, most high frequency inverter uses multiple small transformers instead.
This unit can easily start and run my 1996 25 cu.ft Whirlpool without hesitation, I this fridge for testing inverter surge capability, it has at least 3600W of power surge which most of the 2000W inverters that I have tested fail to start and run this fridge. 2000W AIMS and BougRV can run my fridge OK, but other brands have failed to do so.

Now the bad part:
The Voltmeter calibration is way off, it shows 115V ac on the display but my Fluke and Kill-A-Watt meter show 120V ac, this is will also cause the Watt display to be off also.
The cables that come with the unit are too small, you should use 2/0 wire gauge for this unit for the DC input wires. 2000W AC output/12V = 167A, 167A/0.85 = 196A on the DC input side due to 85% inverter efficiency.
According to the tech support, you cannot bond Neutral and Ground together otherwise it will damage the unit.
It only has 2 AC outlets.

A
A.H.
Heavy duty, works great

We run this inverter while driving our SUV to charge Lithium ion batteries for our camper. It works flawlessly and I couldn't be happier with it. This inverter is somewhat big and very heavy but with the remote control, it's easy to start it. I can recommend it.

S
Sounds of Rain
It's HUGE but doubled my power!

Needed to find a 3000 watt inverter because my 1500 watt pure sine wave inverter could not handle my 600 watt microwave in my Freightliner truck. The 1500 watt inverter worked perfectly fine in a Volvo so I thought it would work in the Freightliner. Well, I could not run the microwave for long in my Freightliner truck before the fuse breaker switch would pop. So I had to do my research. I found this 3000 watt pure sound wave inverter by Erayak. Purchased a new one and it came packaged with all the bells and whistles. Everything was in the box, the set up with a snap, and my microwave works as it should, and no popping the breaker fuse. Happy with this purchase and the extra power. The only criticism is that I do wish it were smaller. But fortunately it still fit in the spot where my smaller inverter was, but barely.

A
Andrew Stavros
So Far So Good 👍

It's been over a couple of months since I set it up. This powerhouse is keeping a fridge, 57" TV, microwave, Keurig coffee machine, and a security light running around the clock without a hitch. The fan rarely kicks in, and even when it does, it's super quiet. Couldn't be happier with its performance. If anything changes, I'll update this review later on.

C
Craigc
This thing is a beast.

I have a few 2000 Watt Pure Sine wave inverters and this is the largest. I am not sure if that is because it has heavier duty components or is using older tech which is typically larger. But either way, this performs great. I live out in the country and my power goes off frequently. The pure sine wave is necessary for my computer UPS and systems. The external remote switch is very nice and the whole unit would be great addition in an RV. A 2000 watt inverter is not enough to run your house, but could run probably run an RV depending on what you have plugged in. You would need several for a house. Just double check the Wattage of the devices you are using. IMO, you never want to run an inverter at 100% load for very long and like to keep it around 80% load for any length of time. I will update if anything changes good or bad.

C
C.
"I've got the power" ... nice inverter

I ordered this for an off-grid pavilion with solar panels and a battery bank. It has a nice remote 'on/off' switch and the wiring to control it. The packaging is good. I haven't hooks up an oscilloscope but everything seems to work like it was on line power.

This would be great for a small home with minimal power requirements. This will require a pretty good sized battery if you want to use it with stuff like a microwave (small) or a hair dryer (1500W) I am pretty impressed with this.

b
bcsinflight
Massive power plant

This inverter is large and in charge ! Has all the power I need plus some. Just make sure your vehicle has the battery and alternator power to run it to it's full potential. It will let you know and shut off on low battery voltage. When under a heavy load it does pull a lot of current but is pretty efficient. Has no issue power up a portable air conditioner and misc small items, laptop, cell phone chargers, small flat TV etc. So foa so good Id definitely give a recommendation.

M
M.6.
Inverter for 12v to 120v

This inverter is exactly what I was looking for. I live in an area with an unreliable electric grid so we decided to install solar panels. Without a service provider, I can't store or access the power my panels generate. That's where this inverter comes in. I have been working on finding ways to be able to independently utilize the electricity from my panels if the grid/service provider are not available. I have been building a small stand alone with batteries so I can at least run my workshop. This is working out exactly like I hoped it would. This inverter is heavy duty, well made using quality materials and works as described. I am very pleased with this inverter and I highly recommend it.

G
G.S.
Working Amazing

The Erayak 2000W Pure Sine Wave Inverter is a versatile and powerful inverter that can be used in various applications, including powering your home, RV, truck, or off-grid solar power system. It has a number of features that make it a great choice for those looking for a reliable and easy-to-use inverter.

Some of the key features of the Erayak 2000W Pure Sine Wave Inverter include:

Pure sine wave output: This ensures that your devices will receive clean and stable power, just like they would from a wall outlet.
2000W continuous power, 4000W peak power: This provides enough power to run various appliances and devices, including TVs, refrigerators, microwaves, and more.

12V DC input: This allows you to connect the inverter to your car battery, RV battery, or solar power system.
120V AC output: This provides standard AC power that can be used to power various devices.
18W USB-C port and USB fast charger: This allows you to charge your USB devices, such as smartphones, tablets, and laptops.

LCD monitor: This displays important information about the inverter, such as input voltage, output voltage, power output, and battery level.

AC hardwire port: This allows you to hardwire the inverter to your home or RV electrical system.
Remote controller: This allows you to control the inverter from a distance.
In my experience, the Erayak 2000W Pure Sine Wave Inverter is a well-made and reliable product. It is easy to use and has all the features that I need in an inverter. I recommend it to anyone who is looking for a powerful and versatile inverter.

Here are some of the pros and cons of the Erayak 2000W Pure Sine Wave Inverter:

Pros:

Pure sine wave output
2000W continuous power, 4000W peak power
12V DC input and 120V AC output
18W USB-C port and USB fast charger
LCD monitor
AC hardwire port
Remote controller

Cons:

Can be a bit expensive
Some users have reported that the fan can be a bit noisy
Overall, I am very impressed with the Erayak 2000W Pure Sine Wave Inverter. It is a powerful, versatile, and easy-to-use inverter that I highly recommend to anyone who is looking for a quality product.

Here are some additional things to consider before purchasing the Erayak 2000W Pure Sine Wave Inverter:

Make sure that the inverter has enough power to run all of the devices that you plan to use it with.
Consider the type of input and output connections that you need.
Decide whether you need an LCD monitor or a remote controller.
Compare prices from different retailers before making a purchase.

d
delf hedde
A serious piece of equipment!

This Erayak 2000W Pure Sine Wave Inverter is neither small nor light. It's a solidly build piece of serious equipment with convincing technical specs. As another reviewer posted, this is a pure sine wave inverter. It creates high quality power with a stable frequency. No frequency and voltage fluctuations, no Noisy RF interference. I can run this inverter right next to my radio equipment with zero issues.
The power output is perfect for my needs: It woks great as a mobile platform and does additional duty with back up power at home.
Don't waster your money on cheap inverters. This is the real deal.

M
Mike K
Impressive

I live part-time in a converted van and I absolutely depend on AC power. I have camped like this since 2018 ,and have gone through many options and several inverters. Currently, I use a solar generator with 400 watts of solar panels on my roof to keep my microwave, capsule coffee pot, and induction burner happy. However, there are times when there isn't enough sun. I can use an inverter to power all of these while idling my car (one at a time). Additionally, I can run the inverter while driving to power the the solar generator's AC adapter (to charge it) when driving. This way I always have power to spare. This is what to look for if you are in this situation.

Power: I think 2,000 watts is ideal. The largest wattage that any normal home appliance will pull is 1,800 watts, with many appliances using 1000-1500 watts. My coffee pot uses around 700 watts, my microwave uses 1,100 watts (700 watts output), and my induction burner uses a maximum of 1500 watts. A 2 KW inverter can handle any of these (again, one at a time). I could get a bigger inverter but I don't think my vehicles electrical system could handle it.

Pure Sine Wave: This option is becoming more common and less expensive. If possible, don't buy a modified sine wave inverter. Some things (like many CPAP machines) won't run with dirty power. Others (like some microwaves) may, but they will make more noise, heat your food slower, and likely wear out faster. Pure sine wave most closely duplicates the power that comes out of your power outlet at home.

Additional items to look for

Remote Control: high powered inverters are large and so they are often mounted under or in something. It is best to turn on an inverter only when you need it, as leaving it on will consume quite a bit of energy even if you don't have something plugged in. Some units don't have a wired remote, for some it is an extra purchase, but this unit gives you the remote as well as the connecting cable. I have my remote mounted next to my driver's seat so I can easily turn on the unit to charge my solar generator when driving. It is convenient enough to also turn it on and off when using the inverter as a back up when cooking.

Display: This unit has a simple display on the top, which is nice. Its biggest benefit is that it will give you error codes. I had a problem where my inverter kept on shutting down. By using the error codes I discovered that I had low voltage and was able to trace the problem to a loose battery connection.

Fans: Hot components fail. Good fans cool down hot components. This unit has two fans for good ventilation

Extra: This unit is big and heavy. I'm making an assumption, but it is that this unit has larger components than some other units that I have examined. Beefy components tend to last longer.

A beast of an inverter.

J
Jennifer Miller
Erayak 2000W/3000W Pure Sine Wave Inverter Review

The Erayak 2000W/3000W Pure Sine Wave Inverter is a high-performance device that seamlessly converts 12V DC to 120V AC power, providing a reliable and efficient power solution. Ideal for a range of applications, this inverter offers 2000W to 3000W of continuous power with a peak surge capacity of 4000W to 6000W, ensuring it can handle high-power demands with ease. The pure sine wave output guarantees over 90% conversion efficiency, reducing loss and ensuring cleaner, more stable power.

Safety is paramount with this inverter. It features LED indicators for under-voltage, over-voltage, over-temperature, over-load protection, and short circuit indication. The inclusion of cooling fans and ground-fault circuit interrupter (GFCI) protection further enhances its safety credentials, making it a secure choice for various environments.

A standout feature is the LCD display, which offers vital information about input and output voltage, power, and error messages, ensuring that users can monitor and manage the power system effectively. The added convenience of a remote control panel, operable from up to 6 meters away, allows for easy operation, turning the inverter on and off as needed.

Moreover, this inverter is designed to protect and extend the life of your electronics and appliances. The advanced pure sine wave technology provides quality AC power equivalent to grid power, ensuring that your devices such as flood lights, TVs, freezers, laptops, and tablets are not only safe but also operate smoother, cooler, and quieter.

User-friendliness is also a key aspect of the Erayak inverter. It includes built-in dual 5V/2.1A USB ports, dual AC outlets, and an AC terminal block, offering convenient connectivity options. The package comes complete with the inverter, car battery cables, a remote control, and a 6-meter remote control cable, making setup straightforward and hassle-free.

In summary, the Erayak 2000W/3000W Pure Sine Wave Inverter is an excellent investment for those in need of a powerful, safe, and user-friendly power conversion solution. Its combination of efficiency, safety features, and ease of use makes it a highly recommendable choice for a wide array of applications

K
Keith R.
Does everything it's designed to do!

I use this as part of my little solar power system to power my living room. It's not enough to power my entire house, but it powers the lights, TV, DVD player and stereo in my living room just fine with power to spare. It's quiet, reliable, and easy to use. It can also power the electronics in my gas furnace during a winter power outage. Overall, I am very pleased with this inverter, and I definitely recommend it!

J
James Peter
Enough power to start a Dometic Penguin II without a silly capacitor accessory.

It’s strange what impresses me lately. I never realized “can allow the air conditioner for a 72 square foot space to power on” would be high praise for an electrical component and yet, here we are. Dometic, despite their claims of modernity, mostly produces appallingly inefficient appliances with 1950s technology solely because RV buyers don’t know any better. There’s tons on RV blogs about people being proud of finding “hacks” to allow them to accomplish this incredible feat of turning on a single room air conditioner with a mere 70 pound 2200 watt gasoline generator, because, impressively, they can fit such generators inside their vehicles. My friends, this Erayak 3000w inverter can power that absurd fossil of a cooling device with less than 75 pounds of batteries, and if you were reckless about cooling you could fit the whole shebang inside a regular army foot locker.

Of course, you shouldn’t. It is really the wires more than any other part, but you need air circulation for cooling of the components. At full power, this thing draws nearly 250 amps of DC power and yes, that can melt the insulation on lesser wires. That side of the process is no joke. But the device itself is absolutely tough and will handle the absurd loads you may throw at it.

The wiring is no joke. Renogy will tell you about fuses but most RV blogs are lax. You should put a separate 100a fuse on each battery, and you should have at least three batteries feeding this beast in parallel. 100a at 13v DC can absolutely start a heck of a fire so check and double check your wiring. But once you do, you can count on this component not to be the bottleneck in anything short of cooking thanksgiving dinner on a resistance range. Just use an induction top and an air fryer and you should be golden with this kit.

A
A.M.
Top notch inverter!! Pure sine wave is the ONLY way to go!!

I bought and installed this in my RV/Truck camper.. This was actually a “reinstall” / inverter replacement. I had a GOPOWER 3000 watt inverter installed previously. It wouldn’t power my microwave, AC, or provide stable consistent power.. The microwave would work at about 50% power and the AC would overload the inverter during startup. A 1500 watt AC unit overloaded a 3000watt inverter!? (Modified Sine wave) I thought something was wrong! I generate commercially.. It’s what I do. (Power plant operations) Still, I was unaware of the difference between PURE Sine wave and MODIFIED sine wave inverters. When I began researching why my 3000 watt gopower inverter wouldn’t run a 900watt microwave or a 1500 watt AC unit, (separately) the difference is actually quite significant. My new Erayak 2000watt inverter is now powering my AC unit.. It runs everything in my RV and provides stable consistent 120 volt power. My microwave heats like a normal microwave, and instead of my AC voltage being all over the place, it’s always a constant 118-120 volts. This is a no brainer! DO NOT WASTE YOUR $ on a modified sine wave inverter!!! If you really want to, I’m selling a 3k GOPOWER inverter. Only used a few times! Like new! I’ll give ya a heck of a deal… Or, you could just buy a Erayak and be done with it. I know what I’m doing, so I didn’t need Erayak tech support.. Seems a lot of reviews don’t have many good things to say about the Erayak tech support. Something to keep in mind if you have limited experience with electrical.

E
Everett

Can I get solar panels to hook up to this the 3000 watt

Erayak Power

Thank you for your question!

Our current 3000W inverter cannot be connected directly to solar panels. It is designed to connect to a 12V battery, which then supplies power to the inverter.

If you plan to use solar panels, you would need a solar charge controller to charge the battery first, and then connect the inverter to the battery.

We will be launching a new 4-in-1 inverter around July, which will support direct connection to PV solar panels.

Please feel free to reach out if you need recommendations for a suitable setup.